Wire EDM and Precision Wire Cutting Services
Wire EDM services are offered in Riyadh at Taj Al Khalij for Precision Profiles, Precision Dies, Punches and Industrial Tooling. Our in-house wire cut EDM machining is a controlled electrical discharge cutting service for appropriate conductive metals which is backed up by drawing review, CAD/CAM programming and dimensional inspection services for customers throughout Saudi Arabia.
Wire EDM feasibility and achievable tolerance depend on workpiece material, thickness, geometry, wire path and required surface finish.
Precision Wire Cutting From Drawing to Part
Complex profiles, punches, dies and tooling parts manufactured with internal wire EDM machines.
Precision Wire Cutting Tailored to Your Needs
Precision wire cutting of conductive metal parts and tool-and-die components, complex industrial profiles are available at Taj Al Khalij. A selection of drawings, material grades, thickness and specified tolerances and quantities are checked at our Riyadh workshop to determine an appropriate approach for EDM machining.
Wire EDM, commonly known as electrical discharge machining, is a process used to cut electrically conductive materials using a moving wire electrode. Material is eroded along a programmed path with controlled sparks and debris is flushed with the dielectric fluid. It is a process that does not directly cut the part as with conventional cutting.
Wire EDM can be used in most of the conductive materials such as hardened tool steels, stainless steel, carbide etc. It does not necessarily require access, starter holes and part geometry as is the case with laser cutting but can create fine internal profiles in thick conductive stock.
Designed for Intricate Conductive Components.
Our wire cutting Saudi Arabia workflow is an integrated combination of engineering review, programmed wire paths and measurements against approved drawings.
Drawing to Part
Wire-cut profiles produced from approved engineering drawings, dimensions and engineering specifications of needed tooling.
Prototype to Production
One-off tooling, prototypes and repeat production parts made with Wire EDM at a rate subject to scheduling.
Wire EDM Technology
Spark erosion cutting is available for compatible conductive components with two in-house CNC wire cut machines.
Quality Control
Dimensional and surface finish checks are conducted to component specifications agreed.
From Engineering Drawing to Precision Wire-Cut Profile
Our Wire EDM services in Riyadh suit detailed conductive-metal profiles, die tooling wire cutting and precise component features. The published machine limits serve as a guideline for feasibility, and then actual results are confirmed upon review of each drawing.
Precision Profile Cutting
Wire cut EDM machining for detailed external contours, slots and intricate profiles in conductive workpieces.
CNC Machining Services
Die & Punch Cutting
Precision wire cutting of compatible die openings, punch profiles and punch room parts.
CNC Wire Cutting Services
Hardened Tool Steel
EDM cutting of electrically conductive tool steels & hardened grades that are difficult to machine by conventional methods.
Conductive Carbide Cutting
Detailed profile of wire EDM, in electrically conductive carbide grades, on condition of material verification.
Fine Slots & Contours
Production of narrow slots and complex contours when wire access is permissible, width of kerf and corner radius allow.
CNC Machining Service Page
CAD / CAM Programming
Checking geometry and setting up programmed wire paths, lead-in and cutting sequences to match required profiles.
From Engineering Drawing to Precision Wire-Cut Part
Our wire EDM machining process includes drawing review, evaluation of conductive materials, CAD/CAM programming, work piece set up, electrical discharge cutting and inspection according to the set requirements.
Review Requirements
Review drawings, material conductivity, stock thickness, tolerances, geometry and quantity prior to machining.
CAD / CAM Programming
To create appropriate wire paths, offsets, lead ins and machining sequences for a desired profile.
Workpiece Setup
Fix the conductive material to be cut and set up the cutting conditions and the dielectric conditions.
Wire EDM Cutting
Cut approved profiles by controlled spark erosion, with additional finishing passes where specified and feasible.
Inspection & Delivery
Take accurate dimensions and specifications measurements, and complete accepted parts for delivery.
Technology Built Around Wire EDM Requirements
We have two CNC wire-cut machines in our Riyadh workshop. Published Wire EDM limits cover a workpiece envelope of 1000 x 600 x 400 mm, thickness up to 400 mm per part and a taper range of ±3° in 80 mm. Acceptance is subject to the part and setup.
We have two CNC wire-cut machines in our Riyadh workshop. Published Wire EDM limits cover a workpiece envelope of 1000 x 600 x 400 mm, thickness up to 400 mm per part and a taper range of ±3° in 80 mm.
CNC Wire EDM Machines
Two wire-cut machines, in-house, that can cut detailed profiles in suitable conductive workpieces.
Accuracy & Finish
Published capability: accuracy up to ±0.005 mm and surface finish Ra 0.2–1.0 µm, confirm the feasibility of the job.
CAD / CAM Programming
Programmed wire paths and geometry checks on approved drawings and cutting features required.
Materials & Process Limits
Materials used are tool steel, stainless steel, hardened steel, conductive carbide, copper, brass, aluminium and titanium. For nonconductive plastics, the minimum inside radius is determined by the wire size and pass strategy, and they cannot be wire-EDM cut.